Multi-Measure Pack

Multi Measure Packs with arrangements such as 20L+10L+5L (C359-VPK); 20L+10L+2L (C329-VPK); 20L+10L+5L+2L (379-ZPK) are commonly used by metrology service officials. A useful Measure Pack for routine tests by service and maintenance technicians is the 20L+20L+5L+5L Service Measure Pack C509-XPK which allows the testing technician to check the repeatability of Qmax and Qmin tests on each dispenser.

A group of up to 6 Test Measures with capacities ranging from 2L up to 50L or 100L may be suspended from the chassis of a similar 4-wheel Transport Trolley by means of appropriate H-frames fitted into tubular shoes on the trolley chassis in the case of the lesser volume test measures and, by means of a hinge-fastened H-frame in the case of the 100L test measure.


PUMPWATCH Guarantee
All our PUMPWATCH Test Measure are manufactured to the highest standard. Our PW Lite are factory calibrated with an accuracy of ±4ml (over 2 times better than what can be read on the fuel dispenser meter).

With the factory calibration, our test measures can be use only as a reference to check the fuel dispenser. In order to carryout legal verifications, calibrations and inspections it is necessary for the test measures to be calibrated and sealed by an accredited metrology laboratory.

Weights and Measures Test Certificates.
PUMPWATCH can arrange for your test measure to be calibrated by NSAI or any accredited Legal Metrology Laboratory at an extra cost. Typically, when calibrated and sealed by a National Metrology Laboratory, our test measures have an accuracy of 0.02% or better.