Dual Measure Pack

For transporting 2 x 300mm ID test measures with capacity 20L and 10L, a larger, more robust 2-wheel Transport Trolley is available to make up a multi measure pack such as the Dual Measure Pack (C309-DPK), with a 20L and a 10L test measure suspended side-by-side from a readily removable H-frame that comprises 2 x separate sets of upper support legs for suspending the 2 x test measures and, 2 x lower support legs that fit into the tubular shoes on the larger size 2-wheel 55L trolley chassis.

The Twin Measure Pack (C409-WPK) where 2 x 20L equal capacity 20L test measures are suspended side-by-side, is another example of the flexibility of this system for transporting the test measures, where 2 separate sets of upper and lower vertical slots on the upper support legs of the H-frame, allow a taller 20L test measure to be suspended from the upper slots or alternatively a shorter 10L test measure to be suspended from the lower slots in such a manner that the lower neck of either test measure will align with the fixed position cross strut and adjustable levelling screw of each H-frame.


PUMPWATCH Guarantee
All our PUMPWATCH Test Measure are manufactured to the highest standard. Our PW Lite are factory calibrated with an accuracy of ±4ml (over 2 times better than what can be read on the fuel dispenser meter).

With the factory calibration, our test measures can be use only as a reference to check the fuel dispenser. In order to carryout legal verifications, calibrations and inspections it is necessary for the test measures to be calibrated and sealed by an accredited metrology laboratory.

Weights and Measures Test Certificates.
PUMPWATCH can arrange for your test measure to be calibrated by NSAI or any accredited Legal Metrology Laboratory at an extra cost. Typically, when calibrated and sealed by a National Metrology Laboratory, our test measures have an accuracy of 0.02% or better.